Skip to main content

Managing the Applications Lifecycle



Configure a Module to Use a Zone

Only available in OutSystems on-premises installations.

After creating a new zone and associating one or more front-end servers to it, you can configure modules to be deployed to this zone.

Do the following:

  1. Go to the Service Center management console of your OutSystems environment;

  2. Go to the Factory section and select the eSpaces tab;

  3. Click the name of the module that you will be deploying to the new zone;

  4. In the Operation tab, select the desired zone in the "Zone" field;

  5. Click the "Apply" button.

After applying this change, the module will be automatically deployed to the front-end servers that are included in the zone and removed from all front-end servers that don't belong to the zone.

  • Was this article helpful?